finish basic funtunalitiy

src/arduinoNano/arduinoNano.ino

@@ -1,16 +1,21 @@
 #include <avr/sleep.h>
 
 
-float damppotty;
+float dampPotty;
+float onTimePotty;
+float solDampness;
 void setup() {
   pinMode(2, INPUT);
+  pinMode(A0, INPUT);
   pinMode(A2, INPUT);
   pinMode(A4, INPUT);
   pinMode(9, OUTPUT);
   pinMode(7, OUTPUT);
   pinMode(5, OUTPUT);
   Serial.begin(19200);
-  digitalWrite(9 ,HIGH);
+  digitalWrite(5 , HIGH);
+  attachInterrupt(0, wakeUp, FALLING);
+
 
 
 }
@@ -19,27 +24,37 @@ void setup() {
 void loop() {
   Serial.println(digitalRead(2));
   delay(20);
-  if (digitalRead(2) == 1) {
+  bedTimeYet();
-    sleep();
-  } else {
-    Serial.println("Skipping sleep");
-  }
   Serial.println("continuing Main");
   delay(100);
   Serial.println(calculateTargetDampness() , 4);
+  Serial.println(calculatePumpOnTime() , 4);
+  Serial.println(calculateDampness(), 4);
+  pumpOffTime(1);
+  wateringTheGarden();
 }
 
 float calculateTargetDampness() {
- damppotty = analogRead(A2);
+  dampPotty = analogRead(A2);
-  return damppotty / 454 ;
+  return dampPotty / 454 ;
+}
+
+float calculatePumpOnTime() {
+  onTimePotty = analogRead(A4);
+  return (onTimePotty / 452) * 100;
+}
+
+float calculateDampness() {
+  solDampness = analogRead(A0);
+  return solDampness / 500;
 }
 
 void sleep() {
-  digitalWrite(9, LOW);
+  digitalWrite(5, LOW);
   Serial.println("Going to sleep");
   delay(10);
   sleep_enable();
-  attachInterrupt(0, wakeUp, FALLING);
+  //attachInterrupt(0, wakeUp, FALLING);
   set_sleep_mode(SLEEP_MODE_PWR_DOWN);
   delay(10);
   sleep_cpu();
@@ -49,15 +64,47 @@ void wakeUp() {
   // detachInterrupt(0);
   sleep_disable();
   Serial.println("woke up");
-  //afterWakeup();
+  afterWakeup();
 }
 
-void wait(int i){
+void wait(long i) {
   // A finction for consistent delays (only one point to adjust delay when clock speed is lowerd)
+  Serial.print("waiting for ");
+  Serial.print(i);
+  Serial.println(" milliseconds");
   delay(i);
 }
 
 void afterWakeup() {
   delay(100);
-    digitalWrite(9,HIGH);
+  digitalWrite(5, HIGH);
+}
+
+void pumpOffTime(int x) {
+  for (int i = 0; i <= x * 6; i++) {
+    wait(10000);
+    bedTimeYet();
+  }
+}
+
+void bedTimeYet() {
+  if (digitalRead(2) == 1) {
+    sleep();
+  } else {
+    Serial.println("Skipping sleep");
+  }
+}
+
+void wateringTheGarden() {
+  if (calculateTargetDampness() > calculateDampness()) {
+    Serial.println("Watering");
+    digitalWrite(7, HIGH);
+    digitalWrite(9, HIGH);
+    wait(calculatePumpOnTime() * 1000);
+    digitalWrite(7, LOW);
+    digitalWrite(9, LOW);
+
+  } else {
+    Serial.println("Wet enough");
+  }
 }

src/arduinoNano/calibrateSleep.ino

@@ -1 +0,0 @@
-

src/calibrateSleep/calibrateSleep.ino

@@ -0,0 +1,26 @@
+
+void setup() {
+   pinMode(2, INPUT);
+   pinMode(A4, INPUT);
+   Serial.begin(19200);
+   float poty;
+   float dampness;
+
+   
+}
+
+void loop() {
+  Serial.println(digitalRead(2));
+  delay(200);
+  Serial.println(analogRead(A4));
+  Serial.println(percentage() ,4);
+  delay(20);
+}
+
+float percentage(){
+ 
+// float poty = analogRead(A2);
+  //return poty/454;
+  return analogRead(A4) / 454;
+  
+  }