diff --git a/README.md b/README.md
index d14c171..b163902 100644
--- a/README.md
+++ b/README.md
@@ -22,6 +22,17 @@ homeassistant login:
 - When you see the `hassio > ` prompt, type `login`
 - You should now see a `# ` prompt.
 
+## Add a serial port
+
+By adding a serial port, you are able to use a different interface to interact with the VM. When you click on the down arrow next to `Console` you will be able to use `xterm.js` which enables you to `Right-Click` and get access to `Copy` and `Paste` functions. If the serial port was already added by the install script, no further actions are required to enable the functionality.
+- Click on the VM in the list of containers at the left side panel
+- Click `Hardware` tab located beside the list of containers
+- Click `Add` located beside `Summary` tab, then click `Serial Port`
+- `Serial Port` should be set to `0` in the input box, then click `Add`
+- Start the VM, if it isn't already
+- At the root prompt type `sed -i 's/$/ console=ttyS0/' /mnt/boot/cmdline.txt`
+- A `Shutdown` and `Start` is required for the changes to take effect
+
 ## Show Current IP Address
 
 To get the current IP address assigned to the VM from the Proxmox interface
diff --git a/install.sh b/install.sh
index be2454b..29a48f7 100644
--- a/install.sh
+++ b/install.sh
@@ -19,6 +19,11 @@ function error_exit() {
   [ ! -z ${VMID-} ] && cleanup_vmid
   exit $EXIT
 }
+function warn() {
+  local REASON="\e[97m$1\e[39m"
+  local FLAG="\e[93m[WARNING]\e[39m"
+  msg "$FLAG $REASON"
+}
 function info() {
   local REASON="$1"
   local FLAG="\e[36m[INFO]\e[39m"
@@ -125,4 +130,35 @@ qm importdisk $VMID ${FILE%".gz"} $STORAGE ${IMPORT_OPT:-} 1>&/dev/null
 qm set $VMID -bootdisk sata0 -efidisk0 ${DISK0_REF},size=128K \
   -sata0 ${DISK1_REF},size=6G > /dev/null
 
+# Add serial port and enable console output
+set +o errtrace
+(
+  msg "Adding serial port and configuring console..."
+  trap '
+    warn "Unable to configure serial port. VM is still functional."
+    if [ "$(qm config $VMID | sed -n ''/serial0/p'')" != "" ]; then
+      qm set $VMID --delete serial0 >/dev/null
+    fi
+    exit
+  ' ERR
+  if [ "$(command -v kpartx)" = "" ]; then
+    msg "Installing 'kpartx'..."
+    apt-get update >/dev/null
+    apt-get -qqy install kpartx &>/dev/null
+  fi
+  DISK1_PATH="$(pvesm path $DISK1_REF)"
+  DISK1_PART1="$(kpartx -al $DISK1_PATH | awk 'NR==1 {print $1}')"
+  DISK1_PART1_PATH="/dev/mapper/$DISK1_PART1"
+  TEMP_MOUNT="${TEMP_DIR}/mnt"
+  trap '
+    findmnt $TEMP_MOUNT >/dev/null && umount $TEMP_MOUNT
+    command -v kpartx >/dev/null && kpartx -d $DISK1_PATH
+  ' EXIT
+  kpartx -a $DISK1_PATH
+  mkdir $TEMP_MOUNT
+  mount $DISK1_PART1_PATH $TEMP_MOUNT
+  sed -i 's/$/ console=ttyS0/' ${TEMP_MOUNT}/cmdline.txt
+  qm set $VMID -serial0 socket >/dev/null
+)
+
 info "Completed Successfully! New VM ID is \e[1m$VMID\e[0m."