20 lines
1.5 KiB
Markdown
20 lines
1.5 KiB
Markdown
# New Proxmox VM with HassOS
|
|
|
|
This script will create a new Proxmox VM with the latest version of HassOS. To create a new VM in the `local-lvm` storage, run the following in a SSH session or the console from Proxmox interface
|
|
|
|
```
|
|
TMP=`mktemp -d`;pushd $TMP > /dev/null;wget -qO - https://raw.githubusercontent.com/whiskerz007/proxmox_hassos_install/master/install.sh local-lvm | bash;popd > /dev/null;rm -rf $TMP;unset TMP
|
|
```
|
|
|
|
After script completes, click on the new VM (_the script will tell you the ID_), click on the `Hardware` tab for the VM and change the `Memory` and `Processors` settings to what you desire. The `Hard Disk` can be expanded by clicking on it, then click on the `Resize` button above (_Note: for the additional storage to take effect in the VM, you must apply this before the first boot_). The network MAC address can be changed by selecting `Network Device` and clicking `Edit` above. Once all changes have been made, click `Start` above.
|
|
|
|
To get the DHCP address assigned to the VM, open the console after the VM has been started, when the messages slow down press the `Enter` key a couple of times until you see the following
|
|
|
|
```
|
|
|
|
Welcome to HassOS
|
|
hassio login:
|
|
```
|
|
|
|
Login using `root`, no password is requested. When you see the `hassio > ` prompt, type `login`. You should now see a `# ` prompt. Type `ls -l /sys/class/net` and look for a name that looks like `enp0s18`. We'll use that name in the following command `ip addr show dev enp0s18`. Your IP address will be listed right after the `inet`.
|